Hot Stamp Unit

 

Allows batch codes to be hot stamped (melted) in the top of the container.

​

The unit attaches to the left hand side of the test head mast and can be easily adjusted in 3 axes to position the hot stamp unit above the bottle.

​

The unit has it own mains power lead and switch to power the heating element in the unit and comes complete with a temperature and controller.

​

The hot stamp head is lifted up and down by a guided pneumatic cylinder and is controlled via the main controller.

​

Two times are used, one to delay the hot stamp coming down after the test cycle starts and other controls the duration of the hot stamp is held down.

​

The timers are easily accessed from our menu system and the function can be disabled from here when not required.