News

K2010 – Its K Time ! Another 3 years has rolled around and the K show in Germnay is on again. To see leading eadge leak detection, come and visit us in Hall 14, Satnd 14C24, just 30 metres down the ailse from Bekum on the left hand side. We will have 2LD, $LD and 6LD with vacuum conveyor on display, plus video’s of our new travelling head thats just being finished now. Also we will be annoucing...

Profile Solutions will have a 2LD with self test at the upcoming Plastimagen Exhibition in Mexico City.  We are on stand 800 which is listed under the name of our local agent Tecnipet. Thomas Mitchell the M.D.  of Profile Solutions will be in attendance as will our agents Francisco Ollervides and Beatriz Uribe.  The 2LD has our self test option we developed many years that does not waste bottles when it...

Often when people drill a test hole in bottle the hole turns out smaller than the drill due to flexure in the bottle and also from swarf. It is best to ream holes with a strong wire to ensure you have a hole the size you thought you were drilling. Also on holes 8 thou size in bottles need to be reamed very regularly as they easily get blocked up. We use 7, 11 and 14 thou NORDSON glue gun priming wires. Also...

During the last 6 months we have made software upgrades that are now standard on all machines and can be retrofitted to all ‘gen2′ controllers. 1. Conveyor Acceleration And Deceleration Control Now you not only can control the speed but also the accel and decel of the conveyor so that unstable bottles can be tested at the fasted rate. Generally The conveyor is set to the highest speed where the bottle...

This product is one of the major release for Profile Solutions this year. Auto Tuning allows a machine to be set up very easily for both accurate testing and high test rates. On the high speed machine the 6LD-PLUS1 it is a standard feature and also available as an option on the budget machine the 6LD-LP. This software is used as follows From our MENU system the operator picks the hole size which is to be used...

This unit replaces our medium and high speed unit and simplifies our range and also give top end performance at a lower cost than we have been able to do previously. The 6LD-PLUS1 has an enhanced drive and also our new Auto Tune which allows it to test up to 6,900 bph. This rate was achieved on a 100 ml PE bottle and their may be bottles we can run faster and get the rate above 7,000 bph. We shelved our old...

The box diverter separates tested product into 2 boxes. We originally made this to go with our budget machine which has a top rate of 3000 BPH, but we have tested this with some small bottles in conveyor only mode and it has successfully worked at a rate of over 9000 BPH on a small 30ml slightly oval hotel guest bottle, so it can also be used with our faster models too. In the near future we will try and find...