Basically the picture below shows the 90 degree inlet conveyor. It is placed at the outlet of the blow moulder for direct bottle transfer
The unit shown below has an infeed of 800 mm (500 mm standard) and a standard bend radius of 300 mm which is suitable for 5-6 litre bottles.
Right and Left hand pairs can be made for double station machines.
We can also supply extra conveyors for up and down stream of the leak detector.
Also where desired we offer separate compact 90 degree conveyors to do the same function as above but where you would like to retain the standard straight conveyor leak detector conveyor. These legs allow clearance for deflash return systems.
The length of the infeed and outfeed can be made to suit your application.
These can also be made with straight section on the infeed or out feed and with special chains that allow the drive direction to be reversed.