|
The
following options are available for use with our leak detectors.
For more information click on the option name for a detailed
description and picture.
Auto Tuning
Auto
Tuning allows our machines to be setup for high accurate test rates
very easily.
Self Test
Our
unique self test helps your operators learn how to set the machine
for finding smaller holes.
Technical Part
Testers
and Pressure Testers Our same leak detector controllers can be
reconfigured for pressure testing and differential testing.
Batch Count
A simple
low cost way of counting bottles and warning the operator that the
box needs to be changed over, this can also be automated with the
optional box diverter.
Box Diverter
This
option diverts the tested bottles into 2 boxes and attaches to the
outfeed of the leak detector and can be retrofitted to existing
machines with the GEN 2 control.
90 Degree Inlet on Conveyor Infeed &Round the Corner Outlet
Conveyors
Allows
production to be diverted to the front or back of the machine.
Additionally we can offer different conveyor layouts and types.
Inclusion / Web Neck
Testing
Software is built into every leak detector to add an inclusion head
for testing for plastic inside the neck.
Electrical & Mechanical Adjustment
Height
Adjustment Especially useful on the 6ld-b & hp and 30 ld which
have heavier conveyors than the 6ld-lp. For low cost reduce the
work effort.
Drum Orientation
Mainly
supplied with the 30 ld drum tester for automatically orientating
round drums in 3-4 seconds. Also available with large drum testers,
LDT series with integrated conveyors.
Twin Neck Test Head
Variable
angle, variable centre,
- Used with the 30 LD to seal the second neck on drums with one
entry that is angled.
Multi Head Leak Detectors
Leak
detectors for very high speed.
Small Bottle Eject Kit
Fallen Bottle Detection and Ejection
A unit
that can be used up or down stream of a leak detector. Mainly used
downstream to stop fallen bottles clogging the entry to labellers
and printers.
Powered Out Feed Conveyors
Conveyors
added to the end of a leak detector to feed light weight bottles
into labellers.
Angled Neck Testing
Allows
angled neck bottle to be tested even for inclusion testing.
Hot Stamp Unit
Attaches
to the left hand side of the leak detector mast and allows batch
codes to be hot stamped (melted) into the top of a container.
In-line Bottle Weighing
Solutions
for checking the weight of bottles at rates of up to 220 bottles
per minute.
| 