 |
|
|
|
6LD-PLUS1
This unit replaces our medium and high speed unit and simplifies
our range and also give top end performance at a lower cost than we
have been able to do previously.
The 6LD-PLUS1 has an enhanced drive and also our new AUTO TUNE
which allows it to test up to 6,900 bph.
This rate was achieved on a 100 ml PE bottle and their may be
bottles we can run faster and get the rate above 7,000 bph..
We shelved our old HP unit which was little bit faster because it
was too expensive for less than 5% better performance than this new
unit achieves.
In fact it is less expensive to add a second head which gives
around 1.8 times greater output than it was to make the old HP
model which was only about 5% better.
The 6LD-PLUS1 right up to it tops speed it easy to adjust and far
easier at the top end than our old HP unit.
THe unit also is small and compact with the standard 700 mm
conveyor which also has a 40 mm infeed sprocket and a 65 mm outfeed
sprocket for better bottle transition.
It can also fit inside machine guards better taking up less space
which is a very real consideration with machines that deliver
bottles out the front and with labellers and packing tables always
tend to project to far forward.
The design of our machine has been consciously changed so we do not
further contribute to the space problem but inf act help gain some
more space back for you.
Also for unstable bottles we can add a second level of guide rails
which is independently adjustable from the bottom set.
Also all 6LD models now have an adjustable rail on the front rail
so you can easily adjust the rails for different length bottles
more easily than before on our machines or other brands.
To look more at the machine click HERE to see a photo and more
spec's
Back
|
|
|
|